laser cutter software - Thunder Laser

皇冠体育网

Making a difference for our customers
+86 181 0304 3363

Sales Email: sales@fnc-net.com
Tech Email: tech@fnc-net.com

laser cutter software software-problem

Location:Home >troubleshooting >laser cutter software
  • Why the “Origin” button of LCD panel not working

    Why the “Origin” button of LCD panel not working

    Release Time:2018/11/23Browsing Times:3632

    Here are the reasons: ● The starting point is set to absolute coordinate in software. Locate on the bottom left corner, the option of “Position” please select to Current position. ● Ori...

  • How to prepare your files for  feeding into the laser program to cut

    How to prepare your files for feeding into the laser program to cut

    Release Time:2018/11/17Browsing Times:2797

    Scenario 1: If the vector has overlapped paths and it will be cut repeatedly. Solution: In RDworks, you can use “Delete overlap” tool to delete all overlapped paths, like below.  ...

  • How to prepare your files for  feeding into the laser program to engrave

    How to prepare your files for feeding into the laser program to engrave

    Release Time:2018/11/17Browsing Times:4948

    Note: the laser machine can only burn into or through material. Also, the beam can only be made to follow straight or curved paths or to burn a grid of dots (a bitmap image). There is no way for th...

  • Engraving problem—how to Improve Engraving Quality in the  scan mode of X-swing

    Engraving problem—how to Improve Engraving Quality in the scan mode of X-swing

    Release Time:2018/11/17Browsing Times:9185

    The engraving quality working on x-swing is generally worse than x-unilateralism, it usually results in ghosting effect or image offset or bi-directional engraving offset, like below. In RDworks, y...

  • USB cable connection

    USB cable connection

    Release Time:2018/11/16Browsing Times:9608

    Test the connection as following:   1. Don’t forget to install the driver for USB. If you are not sure, just install USB driver again. 2. Laser cutter system connect to the PC. If still ...

  • How to setup wireless network connection for Thunder laser machine

    How to setup wireless network connection for Thunder laser machine

    Release Time:2018/11/16Browsing Times:3644

    Here’s what you’ll need: ● A computer with wireless capability; Almost all laptops have wireless capability built-in, but most desktop computers do not have wireless built-in. ● A wirel...

  • How to run several laser machines with one  PC via Ethernet cable

    How to run several laser machines with one PC via Ethernet cable

    Release Time:2018/11/16Browsing Times:1753

    If there is an Ethernet hub in your network, it’s able for one PC (laser software) to connect with several machines. But pc will does only communicate with one machine and sending the file in...

  • Ethernet  cable connection

    Ethernet cable connection

    Release Time:2018/11/16Browsing Times:4069

    Connect the laser cutter system to desktop or laptop via an Ethernet cable. 1. Configure computer Go to Start>>Control Panel>>Network and Sharing Center, configure the connection for lo...