皇冠体育网A Thunderlaser new product in 2020, the Odin series laser machine combines small size, compact, high quality engraving and cutting at a low cost. With 3G acceleration and 80 IPS (2000mm/sec) engraving speed, it provides a super fast laser engraving solution for industry. The RF tube allows fantastic beam signature and is air cooled, you don’t have to worry about a water chiller. The gantry payload is minimal and is super smooth.
Get the special $1,000 discount with code “EARLYBIRD” for your Odin order, for the first 20 customers only.
High Speed Motor
皇冠体育网Japanese ORIENTAL motor systems on X and Y axes, with 80 IPS (2000mm/s) and 3G acceleration engraving speed.
New: 100% smoother guide Rail
Patent guide rail developed by Thunder Laser, less resistance and low noise.
New: 1,000 DPI RF metal laser source
皇冠体育网With excellent quality Beam output and stable laser power, lifespan up to 10,000 hours.
New: Upper & Lower Vent
To timely remove the heat from material surface.
Dual Air-Assist system
Adjusting air volume for cutting and engraving separately for different requirements
New:Eightfold Open-flap protection
皇冠体育网Laser will stop if someone open any machine cover during working.
Newly-designed focus lens and mirror holder
Easier to clean and replace lens and mirrors, Lenses of different FL are swappable in the same mount.
New housing design
Compact, stand included,room for blower and compressor and space saved.
New Auto focus
No limitation for materials or working area, more accurate.
New:Drawer for collecting small working pieces
皇冠体育网To make it easier to collecting small working pieces and cleaning up.
皇冠体育网Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving
Visible Red Dot Pointer
皇冠体育网Make the laser beam “visible”.
Reduces underside reflections.
High quality power cable
The high-quality electrical connector has low and stable contact resistance.
Heat alarm detector
Heat alarm detector.
皇冠体育网Turn off the machine immediately when there is an accident.
Show the work state and tell when the job is done, more safe for you.
This is a protective conductor, included to prevent shock and/or fire.
皇冠体育网Earthing is used to protect you from an electric shock.
皇冠体育网Engrave high quality 3D photos directly.
皇冠体育网Achieve “3D cutting” on some materials
Work on round items such as tumbler,mug and bamboo pipe by laser cutting machine.
Ensure the work pieces and laser cutter machine inside be clean.
皇冠体育网Blowing air to prevent the material being burned
|Laser System||Odin 22|
|Laser Tube Wattage||30 Watt|
|Working Area||559 x 381 mm (22″ x 15″)|
|Table Size||625 x 440 mm (24.6″ x 17.3″)|
|Dimensions(W x D x H)||1030x860x1090mm (40″ x 34″ x 43″)|
|Laser Type||Radio Frequency Laser Tube|
|Speed and Power Control||Computer or manually controlled speed and power from 0-100%.Vector color mapping sets speed and power settings using RGB color mapping.|
|Operating Modes||Optimized raster,vector,and combined mode|
|Resolution(DPI)||User controlled from 100 to 1000DPI(standard laser head)|
|Computer Interface||Ethernet and USB Connection|
|Compatible Operating Systems||Windows, Mac, and Linux (Mac and Linux with LightBurn Software)|
|Buffer Memory||128MB Standard|
|Display Panel||3.5″ LCD panel showing current file, total working time, laser power, speed, etc…|
|Electrical Requirements||Requirements110 to 240 volts,50 or 60 Hz,single phase|
|Z-Axis Height||190mm (7.5″)|
|Net Weight||125kgs (275lbs)|
|Motion Control System||High-Speed Stepper Motors|
|Speed and Power Control(engraving depth)||
Computer or manually controlled speed and power from 0-100%. Vector color mapping sets speed and power settings using RGB color mapping.
|Operating Modes||Optimized raster, vector, and combined mode|
|Ventilation System||Integral exhaust fan. There is 1 output port, 5.7″ (145 mm) in diameter in the rear of the case.|
|Max Work Height||210 mm (8.2″)|
|Workpiece table||Solid metal blades & Honeycomb table|
|Max. table load||20kg / 44lbs|
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
皇冠体育网 * means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.thermark.com for more information.
皇冠体育网How to choose a reliable laser cutterWATCH NOW
皇冠体育网How to setup your nova laser cutterWATCH NOW
皇冠体育网DPES Sign Fair with Thunderlaser in 2016WATCH NOW
How to install HR headWATCH NOW
Auto focusWATCH NOW
皇冠体育网How the Mars Motorized table worksWATCH NOW